Features Universal Dash Programmer is the most sold programming-device for digital speedometers worldwide. The system is a high-quality tool, which offers a maximum of flexibility and working comfort despite simplest operation. You can serve almost any vehicle with the Tacho Universal. Specification...    Product Detail>> Item No.: u2008
Start From: 1

Introduction: The item is mainly used for odometer adjusting, audio decoding, airbag resetting, anti-theft code reading, and ECU memory programming. Update through Internet; Nearly
support all kinds of latest vehicles up to 2007.
Language: Chinese,English,Japanese and Germany.    Product Detail>> Item No.: SM10
Start From: 1

IntroductionDATA SPECIALIST PLUS is a PC-based multi-function programmer for digital odometers, airbag modules, car radios, car immobilizers. USB 2.0 interface.functionSelf-check function integrated in system. Enhanced OBD functions, including CAN, J1850, ISO9141, and Keyword 2000 protocols.Intuitiv...    Product Detail>> Item No.: DATA SPECIALIST PLUS
Start From: 1

Latest update: VW Polo ,Seat Ibiza Cordoba 2001 - 2005, Fabia 2004 ect. Version 2.2 DO NOT working with interfaces sold before 10 June 2006! Single click access for VDO Seed-Key dashes! (This means:VW Passat B6, Bora/Jetta, Polo to 2004 year, Golf 4, Sharan to 2003 year,Skoda Octavia/Fabia...    Product Detail>> Item No.: VAG TACHO USB 2.5
Start From: 1

The XPROG-m programmer is designed to replace the earlier version of XPROG programmer. XPROG-m programmer is fully upward-compatible hardware with XPROG programmer and have many additional features.

New version release: V5.0
    Product Detail>> Item No.: SM11
Start From: 1

Product name:UPA USB Serial Programmer with Full Adapters
Weight: 1000g
Shipping methods: DHL,UPS or EMS    Product Detail>> Item No.: SM02
Start From: 1

Nissan Consult 3 and Nissan Consult 4 GTR Card works with Nissan Consult 3 and Nissan Consult 4. With GTR card, you can do diagnose, programming and immobilizer programmer for Nissan GTR cars.    Product Detail>>
Start From: 1

Set of CLIP EEPROM connectors for Tacho Universal DIP-8CON,SOIC-14CON and SOIC-8CON including three cables, DIP-8CON, SOIC-14CON and SOIC-8CON.    Product Detail>>
Start From: 1

This repair kit can repair the following troubles: Screen display: Diga update Screen display: RESET No display after powered on No vehicle list, screen display black strip Frequently Halting Screen display both the following: update handheld
The machine cannot read EEPROM    Product Detail>>
Start From: 1

CAS3 Adapter for Digimaster II    Product Detail>>
Start From: 1

CAS3/912X/9S12X IN CIRCUIT PROGRAMMER, you don't need to remove the micro from the board! You only connect 7 pins will be ok. It connect to PC by USB.    Product Detail>>
Start From: 1

The software together with interface is designed for changing the state of kilometers in engine controllers EDC16 in OPEL cars. Everything takes place through diagnostic plug. OPEL KM TOOL software is enriched in the possibility of changing dashboard in selected models. Set contains interface in professional plug OBD which is at the same time the key for activating the program, original CD with program and controllers.    Product Detail>>
Start From: 1

Filter the km synchronization command between the cluster and the EZS module . This is the only way for the correction of w221 and w164 new models    Product Detail>>
Start From: 1

The tms370 is the best low cost programmer for ti tms microcontroller development, car radios and car dashboards programming    Product Detail>>
Start From: 1

This device is a Dash Programmer or ECU Flasher designed for Vehicles using the NEC MCU such as Citroen, Peugeot, Hyundai, Honda, Suzuki, Renault, Opel, Alfa, Chevrolet (please refer to the Applicable Models below) that allows you to modify/reprogram your car’s computer or correct the odometer reading!
    Product Detail>>
Start From: 1

R270 BMW CAS4 BDM Programmer includes all the features of CAS3 programmer.
Directly read and write chip data quickly and safely, support for the new 2009 7 Series (F01/F02) CAS4 odometer and chips read and write data, safe and effective.    Product Detail>>
Start From: 1

Correct mileage for BMW odometers with M35080 chip. It can support BMW E65 / E38/ E39/ E46, etc.
The newest version for the software is 3.0 now
    Product Detail>>
Start From: 1

Communication with PC via a serial port
Easy to use Windows 98/ME/XP software
In-circuit/On-board EEPROM programming
High Speed EEPROM Programming
CONFIG Register Programming
Pin tester in both operation Modes
    Product Detail>>
Start From: 1

Motorola 705 Programmer is easy to use DOS, Windows 95 / 98 / NT / 2000 / XP software .Onboard processor Device selection by 4 jumpers 2 color LEDs indicates mode of operation, security condition (check option available without PC) LPT port self-check function on a board 52PLCC PGA socket on a board and additional adaptor for 64QFP device in complete    Product Detail>>
Start From: 1

CAS3/912X/9S12X IN CIRCUIT PROGRAMMER, you don't need to remove the micro from the board! You only connect 7 pins will be ok. It connect to PC by USB.    Product Detail>> Item No.: SM24
Start From: 1